Molecular structural dynamics in water-ethanol mixtures: Spectroscopy with polarized neutrons simultaneously accessing collective and self-diffusion.

Binary mixtures of water with lower alcohols display non-linear phase behaviors upon mixing, which are attributed to potential cluster formation at the molecular level. Unravelling such elusive structures requires investigation of hydrogen-bonding sub-nanosecond dynamics. We employ high-resolution neutron time-of-flight spectroscopy with polarization analysis in combination with selective deuteration to study the concentration-dependent structural dynamics in the water rich part of the phase diagram of water-ethanol mixtures. This method enables simultaneous access to atomic correlations in space and time and allows us to separate spatially incoherent scattering probing self-diffusion of the ethanol fraction from the coherent scattering probing collective diffusion of the water network as a whole. Our observations indicate an enhanced rigidity of the hydrogen bond network at the mesoscopic length scale compared to the molecular scale as the ethanol fraction increases, which is consistent with the hypothesis of clusters.

Elucidating the hydrotropism behaviour of aqueous caffeine and sodium benzoate solution through NMR and neutron total scattering analysis.

Hydrotropism is a convenient way to increase the solubility of drugs by up to several orders of magnitude, and even though it has been researched for decades with both experimental and simulation methods, its mechanism is still unknown. Here, we use caffeine/sodium benzoate (CAF-SB) as model system to explore the behaviour of caffeine solubility enhancement in water through NMR spectroscopy and neutron total scattering. 1H NMR shows strong interaction between caffeine and sodium benzoate in water. Neutron total scattering combined with empirical potential structure refinement, a systematic method to study the solution structure, reveals π-stacking between caffeine and the benzoate anion as well as Coulombic interactions with the sodium cation. The strongest hydrogen bond interaction in the system is between benzoate and water, which help dissolve CAF-SB complex and increase the solubility of CAF in water. Besides, the stronger interaction between CAF and water and the distortion of water structure are further mechanisms of the CAF solubility enhancement. It is likely that the variety of mechanisms for hydrotropism shown in this system can be found for other hydrotropes, and NMR spectroscopy and neutron total scattering can be used as complementary techniques to generate a holistic picture of hydrotropic solutions.

Using Prenucleation Aggregation of Caffeine-Benzoic Acid as a Rapid Indication of Co-crystallization from Solutions.

Co-crystal design is a convenient way to remedy the poor biopharmaceutical properties of drugs. Most studies focus on experimental co-crystal screening or computational prediction, but hardly any work has been done toward fast, efficient, and reliable prediction of solution crystallization for co-crystal formation. Here, we study the caffeine-benzoic acid co-crystal system, due to its reported difficulty to crystallize from the solution phase. With this work, we investigate whether there is a link between prenucleation aggregation in solution and co-crystal formation and how to harness this for crystallization prediction. 1H and 13C NMR spectroscopy is used to study the prenucleation interaction between caffeine and benzoic acid in methanol, acetone, and acetonitrile as examples of common solvents. In this system, crystallization from methanol leads to no co-crystallization, from acetone to concomitant crystallization of co-crystal and caffeine, and from acetonitrile to pure co-crystal formation from solution. Strong heteromeric dimers were found to exist in all three solvents. Ternary phase diagrams were defined and a solution-accessible co-crystal region was found for all solvents. For this system, the prenucleation clusters found in solution could be linked to the crystallization of the co-crystal. Crystallization from DMSO did not yield the co-crystal and there were no detectable prenucleation aggregates. NMR spectroscopy to probe dimers in solution can thus be used as a fast, reliable, and promising tool to predict co-crystallization from specific solvents and to screen for suitable solvents for manufacturing and scale-up.

Solvent-Dependent Reactivity and Photochemistry of Dinuclear and Mononuclear Platinum(IV) Azido Triazaolato Complexes.

Reaction between the platinum(IV) azido complex trans,trans,trans-[Pt(py)2(N3)2(OH)2] (1) and 1,4-diphenyl-2-butyne-1,4-dione 2 in MeCN produces the intermediate peroxide-bridged dimeric platinum(IV) azido triazolato species (5), which has been characterised by X-ray crystallography. However, if the reaction between 1 and 2 is conducted in MeOH it results in decomposition. Over time in MeCN, dimer (5) converts into mononuclear complexes trans,trans,trans-[Pt(py)2(N3)(triazole)(OH)2] (3 a/3 b), which are in dynamic exchange. If resuspended in protic solvents (MeOH,H2O), 3 a/3 b undergo a slow (22 d) irreversible rearrangement to a cyclised platinum(IV) species 4 which contains a formally N,O-chelated ligand. Conversion of 3 a/3 b to 4 in d 4-MeOH can be accelerated (384x) by irradiation with visible light, although continued irradiation also produces N3 . and OH. radicals, and the [4-N3]+ species can be readily detected by ESI-MS. Solvent choice significantly effects both the cycloaddition reaction between 1 and 2, and the stability of the resultant complexes.

Iridium-catalysed 3,5-bis-borylation of phthalonitrile enables access to a family of C4h octaarylphthalocyanines.

Ir-catalysed borylation of phthalonitrile produces both 4-(Bpin)phthalonitrile (1) and 3,5-bis(Bpin)phthalonitrile (2), which are potential divergent intermediates for the synthesis of functionalized phthalocyanines. To exemplify the utility of 2, we have prepared a series of 3,5-bis-arylphthalonitriles that in turn undergo sterically controlled regioselective cyclotetramization to give previously unknown C4h 1,3,8,10,15,17,22,24-octaarylphthalocyanines.

Persistent Room Temperature Phosphorescence from Triarylboranes: A Combined Experimental and Theoretical Study.

Achieving highly efficient phosphorescence in purely organic luminophors at room temperature remains a major challenge due to slow intersystem crossing (ISC) rates in combination with effective non-radiative processes in those systems. Most room temperature phosphorescent (RTP) organic materials have O- or N-lone pairs leading to low lying (n, π*) and (π, π*) excited states which accelerate kisc through El-Sayed's rule. Herein, we report the first persistent RTP with lifetimes up to 0.5 s from simple triarylboranes which have no lone pairs. RTP is only observed in the crystalline state and in highly doped PMMA films which are indicative of aggregation induced emission (AIE). Detailed crystal structure analysis suggested that intermolecular interactions are important for efficient RTP. Furthermore, photophysical studies of the isolated molecules in a frozen glass, in combination with DFT/MRCI calculations, show that (σ, B p)→(π, B p) transitions accelerate the ISC process. This work provides a new approach for the design of RTP materials without (n, π*) transitions.

The modifying effect of supramolecular gel fibres on the diffusion of paracetamol and ibuprofen sodium on the picosecond timescale.

Employing neutron spectroscopy, we follow the tracer diffusion of two non-steroidal anti-inflammatory drug molecules, paracetamol (PCM) and ibuprofen sodium (IBU), in a supramolecular gel and the corresponding bulk solution. Both solutes show altered diffusion behaviour in the gel phase, deviating from each other and their bulk solution. Whilst picosecond diffusion of IBU is slightly quicker in the gel, this effect is significantly increased for PCM, which is up to 70% quicker in the gel than in solution. This effect is independent of changes in the solvent diffusion reported previously. An increased residence time of PCM in solution at lower temperatures points towards the onset of nucleation and crystallisation. This work reports one of the first experiments on the novel Backscattering and Time-of-Flight option (BATS) on the IN16B spectrometer at the Institut Laue-Langevin, France, which with its range and resolution in neutron energy and momentum transfer is ideally suited to observe this type of diffusion.

Picosecond self-diffusion in ethanol-water mixtures.

We report the self-diffusion in ethanol-water mixtures as a function of the water-ethanol ratio measured at different temperatures using quasi-elastic neutron spectroscopy (QENS). For our protiated samples, QENS is mainly sensitive to the dominant ensemble-averaged incoherent scattering from the hydrogen atoms of the liquid mixtures. The energy range and resolution render our experiment sensitive to the picosecond time scale and nanometer length scale. These observation scales complement different scales accessible by nuclear magnetic resonance techniques. Subsequent to testing different models, we find that a simple jump-diffusion model averaging over both types of molecules, water and ethanol, best fits our data.

Pre-nucleation aggregation based on solvent microheterogeneity.

Investigation into pre-nucleation aggregates indicating hydrate formation of caffeine and theophylline in aqueous acetonitrile showed hydrate crystallisation at much lower water fraction than significant solute self-association. Molecular dynamics simulations indicate that the solvent separates on the molecular scale and that solute molecules preferentially localise on the phase interface.

A novel Pt(iv) mono azido mono triazolato complex evolves azidyl radicals following irradiation with visible light.

The platinum(iv) azido complex trans,trans,trans-[PtIV(N3)2(OH)2(py)2] (1) undergoes cycloaddition with 1,4-diphenyl-2-butyne-1,4-dione (2) under mild, catalyst-free conditions, affording a number of mono and bis click products. The major mono click product (3) exists in MeCN as an equilibrium mixture between two species; 3a and 3b rapidly interconvert through nucleophilic attack of the axial Pt-OH group at the adjacent Ph-CO group. The kinetic and thermodynamic parameters for this interconversion have been measured by selective saturation-transfer NMR spectroscopic experiments and are consistent with cyclisation at the Pt centre. Complex 3b was also characterised by X-ray crystallography. Visible light irradiation (440-480 nm) of 3 in d3-MeCN produces azidyl radicals (N3˙), as demonstrated by EPR spin-trapping with DMPO; no generation of hydroxyl radicals was observed. 1H-195Pt HMBC NMR confirmed that the photoproducts were PtIV rather than PtII species, and HPLC was consistent with these being [3-N3]+ species; no facile photoejection of the triazolato ligand was observed, consistent with MS/MS fragmentation of 3. When 3 was irradiated in the presence of 5'-GMP, no 5'-GMP photoproducts were observed, suggesting that complex 3 is likely to exhibit significantly simplified biological activity (release of azidyl radicals but not DNA binding) compared with complex 1.

Stimulus-Triggered Formation of an Anion-Cation Exciplex in Copper(I) Complexes as a Mechanism for Mechanochromic Phosphorescence.

The investigation of the mechanisms of mechanochromic luminescence is of fundamental importance for the development of materials for photonic sensors, data storage, and luminescence switches. The structural origin of this phenomenon in phosphorescent molecular systems is rarely known and thus the formulation of structure-property relationships remains challenging. Changes in the M-M interactions have been proposed as the main mechanism with d10 coinage metal compounds. Herein, we describe a new mechanism-a mechanically induced reversible formation of a cation-anion exciplex based on Cu-F interactions-that leads to highly efficient mechanochromic phosphorescence and unusual large emission shifts from UV-blue to yellow for CuI complexes. The low-energy luminescence is thermo- and vaporesponsive, thus allowing the generation of white light as well as for recovering the original UV-blue emission.

Increased rate of solvent diffusion in a prototypical supramolecular gel measured on the picosecond timescale.

Solvent diffusion in a prototypical supramolecular gel probed by quasi-elastic neutron scattering on the picosecond timescale is faster than that in the respective bulk solvent. This phenomenon is hypothesized to be due to disruption of the hydrogen bonding of the solvent by the large hydrophobic surface of the gel network.

Synthesis, Photophysical, and Electrochemical Properties of Pyrenes Substituted with Donors or Acceptors at the 4- or 4,9-Positions.

We report herein an efficient and direct functionalization of the 4,9-positions of pyrene by Ir-catalyzed borylation. Three pinacol boronates (-Bpin), including 4-(Bpin)-2,7-di( tert-butyl)pyrene (5), 4,9- bis(Bpin)-2,7-di( tert-butyl)pyrene (6), and 4,10- bis(Bpin)-2,7-di( tert-butyl)pyrene (7), were synthesized. The structures of 6 and 7 have been confirmed by single-crystal X-ray diffraction. To demonstrate the utility of these compounds, donor (NPh2)-substituted compounds 4-diphenylamino-2,7-di( tert-butyl)pyrene (1) and 4,9- bis(diphenylamino)-2,7-di( tert-butyl)pyrene (2) have been synthesized on a gram scale. Acceptor (BMes2)-substituted compounds 4,9- bis(BMes2)pyrene (3) and 4,9- bis(BMes2)-1,2,3,6,7,8-hexahydropyrene (4) were synthesized for comparison. The photophysical and electrochemical properties of compounds 1-4 have been studied both experimentally and theoretically. The S0 → S1 transitions of the 4- or 4,9-disubstituted pyrenes, 1-3, are allowed, with moderate fluorescence quantum yields and radiative decay rates. The photophysical and electrochemical properties of 1-3 were compared with the 2,6-naphthalenylene-cored compound 4 as well as the previously reported 2,7- and 1,6- pyrenylene-cored compounds.

The Complex Solid-State Landscape of Sodium Diatrizoate Hydrates.

Pharmaceutical sodium salts are prone to incorporate water into their crystal structures. The model compound diatrizoic acid monosodium salt, an X-ray contrast agent, has been investigated in depth towards its interaction with water in the solid state. Five hydrates with water content ranging from 0.3 to 8 molar equivalents of water show a high degree of interconvertibility, stoichiometric and non-stoichiometric behaviour, and potential of amorphisation during release of water. A DMSO/water mixed solvate further highlights the high attraction of this salt to incorporate water. All incorporated solvent coordinates to the sodium cation and can further interact and stabilise the respective crystal forms by hydrogen bonding. DTS thus highlights the importance of an in-depth investigation of sodium salts used pharmaceutically to guarantee dose uniformity and stability of final formulation.

Catalyst-free room-temperature iClick reaction of molybdenum(ii) and tungsten(ii) azide complexes with electron-poor alkynes: structural preferences and kinetic studies.

Two isostructural and isoelectronic group VI azide complexes of the general formula [M(η3-allyl)(N3)(bpy)(CO)2] with M = Mo, W and bpy = 2,2'-bipyridine were prepared and fully characterized, including X-ray structure analysis. Both reacted smoothly with electron-poor alkynes such as dimethyl acetylenedicarboxylate (DMAD) and 4,4,4-trifluoro-2-butynoic acid ethyl ester in a catalyst-free room-temperature iClick [3 + 2] cycloaddition reaction. Reaction with phenyl(trifluoromethyl)acetylene, on the other hand, did not lead to any product formation. X-ray structures of the four triazolate complexes isolated showed the monodentate ligand to be N2-coordinated in all cases, which requires a 1,2-shift of the nitrogen from the terminal azide to the triazolate cycloaddition product. On the other hand, a 19F NMR spectroscopic study of the reaction of the fluorinated alkyne with the tungsten azide complex at 27 °C allowed detection of the N1-coordinated intermediate. With this method, the second-order rate constant was determined as (7.3 ± 0.1) × 10-2 M-1 s-1, which compares favorably with that of first-generation compounds such as difluorocyclooctyne (DIFO) used in the strain-promoted azide-alkyne cycloaddition (SPAAC). In contrast, the reaction of the molybdenum analogue was too fast to be studied with NMR methods. Alternatively, solution IR studies revealed pseudo-first order rate constants of 0.4 to 6.5 × 10-3 s-1, which increased in the order of Mo > W and F3C-C[triple bond, length as m-dash]C-COOEt > DMAD.

Synthesis, Structures, and Photophysical Properties of a Series of Rare Near-IR Emitting Copper(I) Complexes.

Herein, we report on the synthesis and structural characterization of a series of trigonal and tetrahedral cationic copper(I) complexes, bearing phosphine or N-heterocyclic carbene ligands as donors, with benzthiazol-2-pyridine (pybt) and benzthiazol-2-quinoline (qybt) acting as π-chromophores. The compounds are highly colored due to their 1MLCT (MLCT = metal-to-ligand charge transfer) states absorbing between ca. λabs = 400-500 nm, with 1ILCT (ILCT = intraligand charge transfer) states in the UV region. The relative shifts of the S0→S1 absorption correlate with the computed highest occupied molecular orbital-lowest unoccupied molecular orbital gaps, the qybt complexes generally being lower in energy than the pybt ones due to the larger conjugation of the quinoline-based ligand. The compounds exhibit, for CuI complexes, rare intense long-lived near-IR emission with λmax ranging from 593 to 757 nm, quantum yields of up to Φ = 0.11, and lifetimes τ of several microseconds in the solid state as well as in poly(methyl methacrylate) films. Although a bathochromic shift of the emission is observed with λmax ranging from 639 to 812 nm and the lifetimes are greatly increased at 77 K, no clear indication for thermally activated delayed fluorescence was found, leaving us to assign the emission to originate from a 3(Cu→pybt/qybt)MLCT state. The red to near-IR emission is a result of incorporation of the sulfur into the chromophore ligand, as related nitrogen analogues emit in the green to orange region of the electromagnetic spectrum. The photophysical results and conclusions have further been corroborated with density functional theory (DFT)/time-dependent DFT calculations, confirming the nature of the excited states and also the trends of the redox potentials.

Water-Soluble Triarylborane Chromophores for One- and Two-Photon Excited Fluorescence Imaging of Mitochondria in Cells.

Three water-soluble tetracationic quadrupolar chromophores comprising two three-coordinate boron π-acceptor groups bridged by thiophene-containing moieties were synthesised for biological imaging applications. Compound 3 containing the bulkier 5-(3,5-Me2 C6 H2 )-2,2'-(C4 H2 S)2 -5'-(3,5-Me2 C6 H2 ) bridge is stable over a long period of time, exhibits a high fluorescence quantum yield and strong one- and two-photon absorption (TPA), and has a TPA cross section of 268 GM at 800 nm in water. Confocal laser scanning fluorescence microscopy studies in live cells indicated localisation of the chromophore at the mitochondria; moreover, cytotoxicity measurements proved biocompatibility. Thus, chromophore 3 has excellent potential for one- and two-photon-excited fluorescence imaging of mitochondrial function in cells.

Reductive Coupling of Diynes at Rhodium Gives Fluorescent Rhodacyclopentadienes or Phosphorescent Rhodium 2,2'-Biphenyl Complexes.

Reactions of [Rh(κ(2) -O,O-acac)(PMe3 )2 ] (acac=acetylacetonato) and α,ω-bis(arylbutadiynyl)alkanes afford two isomeric types of MC4 metallacycles with very different photophysical properties. As a result of a [2+2] reductive coupling at Rh, 2,5-bis(arylethynyl)rhodacyclopentadienes (A) are formed, which display intense fluorescence (Φ=0.07-0.54, τ=0.2-2.5 ns) despite the presence of the heavy metal atom. Rhodium biphenyl complexes (B), which show exceptionally long-lived (hundreds of µs) phosphorescence (Φ=0.01-0.33) at room temperature in solution, have been isolated as a second isomer originating from an unusual [4+2] cycloaddition reaction and a subsequent ß-H-shift. We attribute the different photophysical properties of isomers A and B to a higher excited state density and a less stabilized T1 state in the biphenyl complexes B, allowing for more efficient intersystem crossing S1 →Tn and T1 →S0 . Control of the isomer distribution is achieved by modification of the bis- (diyne) linker length, providing a fundamentally new route to access photoactive metal biphenyl compounds.

An unexpected transmetalation intermediate: isolation and structural characterization of a solely CH3 bridged di-copper(i) complex.

Structural characterization of unsupported, two metal centres bridging methyl groups is rare. They have been proposed as transmetalation intermediates in cuprate chemistry, but as yet no structural evidence has been presented. We have isolated a di-copper(i) complex with solely a methyl ligand bridging two Cu(i) atoms, representing a new bonding mode of CH3.